Fiber Optic Flex Circuit (FOFC)
MDC Solution
MMC Solution
How to Use a Bare Fiber Adapter?
The traditional optical fiber connection is to assemble different optical fiber connectors according to a certain length of bare optical fibers, and process them into jumper wires in the factory. This...
Five Tests to Ensure the Fiber Patch Cord Quality
The quality of fiber patch cords affects the entire fiber-optic link. Each fiber patch cord must be strictly tested before leaving the factory. So what tests will patch cord manufacturers do to ensure...
FBG Fiber Optic Reflector is the Ideal Optical End of FTTX Network Link Monitoring
Fiber optic reflector, also known as fiber Bragg grating filter, is usually installed in the front end of optical network ONU. Combined with OTDR equipment, optical link point-to-point (PTP) or point-...
How to Achieve Precise Connection of Optical Fibers with Fiber Connectors?
When two optical fibers are connected, due to the difference in position, shape and structure of the two optical fibers, the energy cannot pass 100% from one optical fiber to the other optical fiber, ...
What is Armored Fiber Optic Patch Cord and What Are the Characteristics?
Ⅰ. What is an armored fiber optic cable patch cord?Armored patch cord is a special kind of fiber optic patch cord, specially designed with a layer of stainless steel casing to protect the optical fib...
The Features of SC Quick Connector
In fiber optic cabling, field connector components are required in some cases. Typical examples are point-to-point installation, field installation, or maintenance. Field Mount Connector (FAOC) also k...
FBG Reflector is the Ideal Optical End for FTTX Network Link Monitoring
The fiber reflector is also called the fiber Bragg grating filter. It is usually installed at the front end of the ONU of the optical network. Combined with the OTDR equipment, it can realize the poin...
How to Plan the Future 5G Fiber Network?
The real 5G fiber optic network is gradually being rolled out and faces many challenges.Ⅰ. 5G fiber optic has the following capacity requirements1. 4G uses traditional macro base stations with antenn...
How Can Fiber Reflector Be Used in PON Network Link Monitoring?
In the PON (passive optical network) network, especially in the complex point-to-multipoint PON ODN (optical distribution network) topology environment, the rapid detection and diagnosis of optical fi...
Features of FBG Reflector
The FBG fiber grating reflector is a wavelength selective reflector, which is usually installed at the front end of the ONU of the optical network to achieve accurate and fast detection of the end-to-...
The Difference Between Armored Jumper and Ordinary Fiber Optic Jumper
1. Armored fiber jumperAlso known as steel armor jumper, it is a special type of fiber jumper that is coated with a protective helical stainless steel armor sleeve around the fiber. Armore...
What Are Simplex and Duplex Fiber Patch Cords?
Optical fiber jumpers can be divided into simplex and duplex according to the working mode of the interface. What are simplex and duplex? Simplex and duplex are two modes of communication channels in ...
Detailed Introduction of Fiber Jumper Interface Types PC, APC, UPC
In order to make the end faces of the two optical fibers better contact, the ferrule end faces of the fiber jumpers are usually ground into different structures. Common grinding methods are: PC, APC, ...
How Are Fiber Optic Reflectors Applied to PON Network Link Monitoring?
In the PON (Passive optical network, passive optical network) network, especially the complex point-to-multipoint PON ODN (Optical distribution network, optical distribution network) topology environm...
What Are the Advantages of OM5 Fiber Patch Cables Compared to OM3 and OM4?
OM in optical communication refers to Optical Multi-mode, optical mode, which is a standard for multimode fibers to express fiber grades. At present, the fiber patch cord stand...