Optical fiber jumpers can be divided into simplex and duplex according to the working mode of the interface. What are simplex and duplex? Simplex and duplex are two modes of communication channels in telecommunications and computer networks. Simplex and duplex jumpers can also be called single-link and duplex (single-core, dual-core).
Simplex is data transfer only supported in one direction. At both ends of the communication, one end is the transmitter and the other end is the receiver, which is not reversible. A radio station, for example, usually only sends a signal to the audience and does not receive the audience's signal.
Duplex is divided into half duplex and full duplex. Half-duplex means that data can be transmitted in both directions on the signal carrier, but not at the same time. During the communication process, the transmitter and receiver at both ends of the communication system can switch the direction through the transceiver/transmit switch to realize transmission in a single direction. It can also be said that the half-duplex mode is a simplex communication with switchable directions.
For example, a walkie-talkie, when you press the call button, you can send a conversation to the other party, and the other party can hear it, but the other party cannot talk to you at the same time.
Full-duplex is capable of bidirectional data transmission in both directions of the signal carrier at the same time, receiving data while sending data, requiring both the sender and the receiver to have independent receiving and sending capabilities at the same time.
Full-duplex mode can also be viewed as simplex communication that allows simultaneous transmission in both directions. Just like a telephone, the two parties can talk at the same time by using the two-way instant transmission technology. The duplex fiber jumper can be composed of two simplex jumpers through special design. The fiber jumper is a single-tube dual-core.
Whether it is simplex or duplex fiber optic patch cord can have single-mode and multi-mode modes, you can click here to understand what single-mode and multi-mode are. Single-mode and multi-mode have different applications. Generally speaking, single-mode is compared with It is suitable for long-distance transmission, and multi-mode is suitable for short-distance transmission. The choice of which mode of fiber jumper is based on the actual application scenario.
T&S Communications is one of the leading manufacturers of optical communication components in China, focusing on developing, manufacturing and marketing a wide range of optical communication products ranging from passive to active categories of optical communication networks and data centers. If necessary, welcome to consult.