Name: 100G QSFP28 AOC
Brand: T&S Communications Co., Ltd.
Availability: InStock

T&S Communication TSQS-851HG-xxxC is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+SR4 for 100 or 40 Gigabit Ethernet, Infiniband FDR/EDR Applications. This transceiver is a high-performance module for short-range multi-lane data communication and interconnects applications. It integrates four data lanes in each direction with 100 Gbps bandwidth. Each lane can operate at 25Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses a 12 fiber MTP(MPO) connector.

GET A QUOTE About 100G QSFP28 AOC

100G QSFP28 AOC Specification Download

Features of 100G QSFP28 AOC

Four-channel full-duplex active optical cable with QSFP28 plugs
Produced by T&S, a professional AOC manufacturer, the 100G QSFP series has multi-rate capability: 10Gb/s and 25Gb/s per channel
Reliable VCSEL array technology using MMF
Hot Pluggable
Power dissipation:<3.5W
Operating case temperature 0℃ to 70℃
RoHS compliant

Applications of 100G QSFP28 AOC

IEEE 802.3bm 100GBASE SR4 and 40GBASE SR4 28G Fiber Channel
Infiniband FDR/EDR

Module Block Diagram of 100G QSFP28 AOC

Module Block Diagram

Specifications of 100G QSFP28 AOC

Absolute Maximum Ratings

Recommended Operating Conditions

Electrical Characteristics

Parameter	Symbol	Min	Max	Unit
Storage Temperature	T_S	-20	85	℃
Case Operating Temperature	T_Case	0	70	℃
Relative Humidity	RH	0	85	%
Supply Voltage	V_CC	-0.5	3.6	V

Parameter	Symbol	Min	Typical	Max	Unit
Case Operating Temperature	T_Case	0	-	70	℃
Humidity	RH	5	-	85	-
Supply Voltage	V_CC	3.13	3.3	3.47	V
Data Rate Per Lane	DR	-	25.78125	-	Gbit/s
Fiber Bend Radius	R_b	3	-	-	cm

NOTE: The EDR module requires an electrical connector compliant with SFF-8662 or SFF-8672 be used on the host board to guarantee its electrical interface specification. Please check with your connector supplier

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	V_CC	3.15	-	3.45	V
Supply Current	I_CC	-	-	1010	mA
Total Power Dissipation1,2	P	-	-	3.5	W
Transmitter
Differential Input Voltage	V_in	-	-	900	MVP-p
Differential Termination Resistance Mismatch	-	-	-	10	%
Transition Time, 20 to 80%	Tr, Tf	10	-		ps
Receiver
Differential Output Voltage	V_out	-	-	900	MVP-p
Differential Termination Resistance Mismatch	-	-	-	10	%
Transition Time, 20 to 80%	Tr, Tf	9.5	-	-	ps
Bit Error Rate3	BER	-	-	10^-12	-

Note:

Maximum total power value is specified across the full temperature and voltage range
Settable in various discrete steps via the I2C interface
BER=10-12, PRBS 231-1@25.78125Gbps

Pin Descriptions of 100G QSFP28 AOC

Pin Descriptions

Pin Definitions of 100G QSFP28 AOC

Pin	Symbol	Name/Description
1	GND	Ground
2	Tx2n	Transmitter Inverted Data Input
3	Tx2p	Transmitter Non-Inverted Data Input
4	GND	Ground
5	Tx4n	Transmitter Inverted Data Input
6	Tx4p	Transmitter Non-Inverted Data Input
7	GND	Ground
8	ModSelL	Module Select
9	ResetL	Module Reset
10	Vcc Rx	+3.3 V Power supply receiver
11	SCL	2-wire serial interface clock
12	SDA	2-wire serial interface data
13	GND	Ground
14	Rx3p	Receiver Non-Inverted Data Output
15	Rx3n	Receiver Inverted Data Output
16	GND	Ground
17	Rx1p	Receiver Non-Inverted Data Output
18	Rx1n	Receiver Inverted Data Output
19	GND	Ground
20	GND	Ground
21	Rx2n	Receiver Inverted Data Output
22	Rx2p	Receiver Non-Inverted Data Output
23	GND	Ground
24	Rx4n	Receiver Inverted Data Output
25	Rx4p	Receiver Non-Inverted Data Output
26	GND	Ground
27	ModPrsL	Module Present
28	IntL	Interrupt
29	Vcc Tx	+3.3 V Power supply transmitter
30	Vcc1	+3.3 V Power Supply
31	LPMode	Low Power Mode
32	GND	Ground
33	Tx3p	Transmitter Non-Inverted Data Input
34	Tx3n	Transmitter Inverted Data Input
35	GND	Ground
36	Tx1p	Transmitter Non-Inverted Data Input
37	Tx1n	Transmitter Inverted Data Input
38	GND	Ground

Mechanical Specifications of 100G QSFP28 AOC

Mechanical Specifications