The T&S TFF 100GHz DWDM Module is a high-performance optical device designed for Dense Wavelength Division Multiplexing (DWDM) systems. This module operates with a 100GHz channel spacing, enabling efficient wavelength management and high-capacity data transmission over optical fiber networks. With low insertion loss, high isolation, and exceptional performance across a wide wavelength range, it ensures optimized signal integrity and reliable connectivity for long-haul and high-speed communication systems.
| Parameters | Unit | Specification |
| Central Wavelength | nm | ITU-T Grid |
| Channel Spacing | GHz | 100 |
| Channel Pass Band@-0.3dB | nm | >0.22 (λITU ±0.11nm) |
| Channel Count | Channel | 2 | 4 | 6 | 8 | 12 | 16 |
| Insertion Loss | dB | ≤1.2 | ≤1.7 | ≤2.2 | ≤3.0 | ≤3.8 (Standard loss) | ≤5.0 (Standard loss) |
| ≤3.0 (Low loss) | ≤3.5 (Low loss) |
| Ripple | dB | ≤0.5 |
| Isolation | Adjacent Channel | dB | >30 |
| Non-adjacent Channel | dB | >40 |
| Insertion Loss Thermal Stability | dB/℃ | ≤0.003 |
| Wavelength Thermal Stability | nm/℃ | ≤0.001 |
| Return Loss | dB | ≥45 |
| Polarization Dependent Loss | dB | ≤0.20 | ≤0.30 |
| Directivity | dB | ≥50 |
| Power Handling | mW | 300 |
| Operating Temperature | ℃ | -40 ~ +85 |
| Storage Temperature | ℃ | -40 ~ +85 |
| Fiber Type | -- | Corning SMF-28 Ultra, G657A1/A2 or customer specified |
| Pigtail type | -- | Ø0.9mm loose tube or Ø1.6mm/Ø2.0mm/Ø3.0mm optical cable; |
| Fiber length | m | 1.0, or customer specified |
| Connector Type | -- | LC, SC, or customer specified |
| Package Dimension | mm | ABS Box with L100xW80xH10 (2/4/6/8CH) or L120xW80x H18 (12/16CH) |
| Cartridge: 130X100X25 |
Note:
Insertion loss excluding connector loss. With connectors add 0.3dB;
Customized dimension is available.
Tap monitoring port and expansion port are optional.
EN
jp 
fr 
es 
it 
ru 
pt 
ar 
el 
nl 
Fiber Optic Flex Circuit (FOFC)
Advanced Simulation & Optimization, High Positioning Accuracy, Flexible Customization, Rigorous Reliability Testing
MDC Solution
US Conec's MDC connector is a Very Small Form Factor (VSFF) duplex optical connector, expertly designed for terminating single-mode and multimode fiber cables with diameters up to 2.0mm.
MMC Solution
US Conec's Very Small Form Factor (VSFF) multi-fiber optical connector that redefines high-density connectivity with its cutting-edge TMT ferrule technology and intuitive Direct-Conec™ push-pull boot design.
_and_High-Reflection_(HR)_Optical_Coatings.webp "Anti-Reflection (AR) and High-Reflection (HR) Optical Coatings")
